Pulsafeeder PULSAlarm Bedienungsanleitung PDF herunterladen (Seite 11)

To set up Pressure:

1. Complete re-assembly of the diaphragm, reagent head, and external components if they were

taken apart. Ensure that reagent head and tie-bar bolts are tightened according to the

appropriate torque specifications

2. Remove the pressure gauge from the housing body and replace it with a straight tubing

adaptor fitting. This will be referred to in this document as the “outlet side”

Figure 6 – fitting for priming “outlet side”

3. Remove the plug from the inlet side needle valve on the front of the reagent head, and install

a hose adaptor fitting. This will be referred to in this document as the “inlet side”.

Figure 7 – “inlet side”

fitting

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Keine Kommentare

Pulsafeeder PULSAlarm Bedienungsanleitung Seite 11